All Geared Lathe Machine

All Geared Lathe Machine
All Geared Lathe Machine

Monday, 22 October 2012

All Geared Lathe Headstock

Headstock Composition

All Geared Lathe Machine are manufactured with the usage of the most advanced technology as it contains the minor to the major accuracy work, which is not possible without the EXPERTISE of the Expert Lathe Machine Manufacturer. 
HEADSTOCK EXPLODED VIEW












All Geared Lathe

















A Headstock contain numbers of gears so that different speeds or RPM can be obtained. It is very important to use the right material for the Gears & the Shafts and not to forget Headstock Spindle. Carbonized Material is regarded as the best material for these gears & so as for the Shafts. The headstock is made of robust material as due to cutting forces involved, which can disturb the performance as these forces can reduce the quality of the finished workpiece.

The Spindle is hollow, so that long pieces or bars can be extended to the work area. The Main Spindle runs in Bearings and is fitted with some means of attaching work-holding devices such as Dog Chucks or Three Jaw Chucks. This end of the spindle usually also has an included Morse Taper, to allow the insertion of Dead Centers or Live Centers or Tapers. All Geared Head use a gear box driven by a dedicated electric motor & it allows the Machine Operator to run it on different speeds by changing the Lever Positions given series.

No comments:

Post a Comment