Taper Turning Attachment in Lathe
The advantage of this method is that long
tapers can be machined & is offered by Preet Lathe . As power feed
can be employed, the work is completed at a shorter time.
Preet Lathe manufacturers taper attachment consists of a bracket which is attached to the rear end of the lathe bed. It supports a guide bar pivoted at the center. The bar having graduation in
degrees may be swiveled on either side of the zero graduation and set at the desired angle
to the lathe axis. A guide block is mounted on the guide bar and slides on it. The cross slide
is made free from its screw by removing the binder screw. The rear end of the cross slide
is tightened with the guide block by means of a bolt. When the longitudinal feed is engaged,
the tool mounted on the cross slide will follow the angular path as the guide block will slide
on the guide bar set at an angle of the lathe axis. The depth of cut is provided by the compound
slide which is set parallel to the cross-slide. All Geared Lathe Machine are offered with Taper Turning Attachment.
degrees may be swiveled on either side of the zero graduation and set at the desired angle
to the lathe axis. A guide block is mounted on the guide bar and slides on it. The cross slide
is made free from its screw by removing the binder screw. The rear end of the cross slide
is tightened with the guide block by means of a bolt. When the longitudinal feed is engaged,
the tool mounted on the cross slide will follow the angular path as the guide block will slide
on the guide bar set at an angle of the lathe axis. The depth of cut is provided by the compound
slide which is set parallel to the cross-slide. All Geared Lathe Machine are offered with Taper Turning Attachment.
